***供应RKC理化CD901温控表
联系人：魏工 电话：15882174684
座机：028-84472033
***：2030149354
产品资料：
terminal (at 500 VDC)
Safety standard compliance UL508/CE
Internal power c***umption (normal *2 / maximum*3) 7 W/22 W 11 W/41 W 14 W/60 W 18 W/80 W
Serial
communication
RS232C (Interface terminal) Yes (RJ45)
USB (interface terminal) Yes (B connector)
I/O signal Yes (RJ45)
Accessory functi***
Beeper setting; Auto restart setting; Auto test setting; Auto restart mode setting; Input
sensitivity setting; Remote ON/OFF signal logic setting; Cold start setting; Battery life counter
setting; Power switch function setting; Maximum backup time setting; Startup battery level
setting; Backup stop (BS) signal delay time setting; Backup (BU) signal delay time setting;
and Contact signal I/O test
No. Name Function
1 Operation panel Describe the name of each part.
2 DC output terminal block Connect to load lines.
3 DC input terminal block Connect to input lines.
4 GR terminal Ground this terminal to less than 100 Ω to improve noise resistance and prevent electrical shock.
5 USB port Connect to a USB cable.
6 RS-232C port Connect to a RS-232C cable.
7 CONTACT port I/O port. Connect to a signal line.
8 “Status indicator” digital indicator The seven-segment display indicates the status of the UPS.
9 “Beep Stop/Test” switch Stop the beeper and perform self-diagnosis testing.
10 “Power” switch Turn the power of the UPS ON/OFF.
Rear view
S8BA-24D24D120LF (120 W)
S8BA-24D24D240LF (240 W)
S8BA-24D24D360LF (360 W)
S8BA-24D24D480LF (480 W)
Connecting a cable to the input terminal block and the output terminal block
For details about the connectable sizes and recommended cable sizes, see the following table.
No. Name Function
11 DIN rail mounting hook Hook the UPS on the DIN rail.
12 DIN rail mounting groove Groove for positioning the DIN rail and the UPS.
Connectable size Cable Solid wire 0.2 to 4.0 mm2
Twisted pair 0.2 to 2.5 mm2