1. Preface:
The purpose of this product specification is to provide technical information for the rechargeable Lithium-ion button battery LIR1254, manufactured and supplied by Shenzhen Lidea Battery Co., Ltd.
2. Description and Model
|
2.1 Description |
Rechargeable Lithium-ion button battery |
|
2.2 Model |
LIR1254 |
|
3. Specification |
|
|
3.1 Capacity |
45&plu***n;5mAh |
|
3.2 Charging Voltage |
4.20V |
|
3.3 Nominal Voltage |
3.7V at 0.2C mA |
|
3.4 Standard Charging Method |
C***tant current:9mA C***tant voltage 4.20V |
|
3.5 Cut-off Discharge Voltage |
2.75V |
|
3.6 Max.Discharge Current |
45mA |
|
3.7 arge Current |
45mA |
|
3.8 Cycle Life |
>500 cycles at 0.2C mA discharge |
|
3.9 Ambient Temperature |
|
|
for Standard Charge |
0℃~45℃ |
|
for Discharge |
-20℃~60℃ |
|
3.10 Storage |
|
|
for within the temperature |
-20℃~60℃ |
|
for within the humidity |
≤75% |
|
3.11 Energy Density |
|
|
Wh/L |
|
|
Wh/Kg |
|
|
3.12 Weight of Bare Cell |
~1.7g |
|
3.13 Charge State Internal Impedance |
≤1200mΩ |
4. Appearance
Appearance shall be free from any remarkable scratch,flaws, rust, discoloration or electrolyte leakage (visible or by ***ell).
5. Standard Test condition
5.1 Environment Conditi***: Unless otherwise specified,all test stated in this Product Specification are conducted within the temperature 15~25℃ and the humidity 45~85%RH.
5.2 Test Equipment:
Impedance meter: The impedance meter with AC 1kHz should be used.
6. Test Procedure and Its Standard
|
Item |
Measuring Procedure |
Standard |
|
6.1 Appearance |
Visual |
No Defect and Leak |
|
6.2 Dimension |
Caliper |
As item 8 |
|
6.3 Weight |
Scale |
As item 3.12 |
|
6.4 Maximum Charge Current |
CCCV(C***tant Current C***tant Voltage) |
45 mA |
|
6.5 Full charge |
CC/CV |
Charge it with 0.2CmA c***tant current till 4.2V(Max), then charge it with c***tant voltage 4.2V until the charging current drops to 0.01C. |
|
6.6 Open Circuit Voltage |
Within 1hr after full charge,measure Open circuit voltage |
>4.15V |
|
6.7 Internal Impedance |
Measure the battery with 1kHz AC |
≤1200mΩ |
|
6.8 Discharge Capacity |
Within 1hr after full charge,discharge until final discharge,at 0.2C mA and measure the capacity |
>45mAh |
|
6.9 Maximum Discharge Current |
Until final discharge voltage |
45 mA |
|
6.10 Charge/Discharge Cycle Life |
Discharge:0.2CmA to 3.00V,This charge/discharge shall be repeated 500 times Charge:CCCV,CC- 0.2CmA,CV- 4.2V until the CC is below 0.01CmA. |
Discharge capacity should be >70% of item 6.8 |
|
6.11 Leakage Proof |
After full charging,the battery shall be stored at 40&plu***n;2℃ and humidity 80&plu***n;5% for 21 days. |
No leakage should be observed by visual inspection |
|
6.12 Temperature Characteristics |
|
Discharge capacity should be>60% of item 6.8 and no abnormality on its appearance and structure. |
|
6.13 Charge Retention |
After full charging, stand at 20&plu***n;5℃ discharge capacity for 28 days, measure the discharge should be>85% of item capacity according to item 6.8. |
|