进口BRAGA MORO/battery（中国）***代理
答:电池容量转换曲线
b . 5秒和1分钟放电特性曲线
c .浮充电压和温度曲线
d .浮动电池寿命和温度曲线
大肠不同比率为1小时后电池放电脉冲放电电流曲线
f .不同比率为0.5小时后电池放电脉冲放电电流曲线
电池容量和放电时间曲线
h .不同电池放电率、电压和时间的关系曲线
为所有人提供工程图纸依法追究特殊密封,和***终的图纸。
7.1基本要求
安装7.1.1在这部分的实现合同当事人的报价所提供的设备进行检验和性能测试实验,确保报价所提供的设备符合技术规范的要求。设备和它的主要组件是按照***有关标准进行类型测试,因素
A. battery capacity conversion curve
B. for 5 seconds and 1 minute discharge characteristic curve
C. Float charging pressure and temperature curve
D. Floating battery life and temperature curve
E. Different ratio for battery discharge impulse discharge current curve after 1 hour
F. Different ratio for battery discharge impulse discharge current curve after 0.5 hours
G. Battery capacity and discharge time curve
H. Different battery discharge rate, voltage and time relation curve
For all provide engineering special seal shall be affixed to the drawings, and for the final drawings.
7.1 the basic requirements
7.1.1 during this part for the implementation of the contract party to the quotation of the equipment supplied by inspection and performance test experiment was carried out, ensure the equipment to be provided by quotation in compliance with the requirements of the technical specification. Equipment and its main components are conducted in accordance with relevant state standard type test, factory test, all kinds of test are conducted according to relevant standa*** and regulati*** of the state. Each group, all battery factory experiment was carried out, and to provide a complete test report and factory test reports and test acceptance criteria.
7.1.2 offer party shall within one month after the contract comes into force, to make an inquiry in connection with this contract equipment to be supplied by inspection, performance acceptance test criteria, and in the test report will be a month ago test standa***, plans and reports to send inquiry party inspection. Relevant standa*** shall comply with the provisi*** of the technical specification.
7.1.3 offer will match all equipment field test of the machine.
7.1.4 inquiry think a test condition, content, procedure, measure and record any item is not in conformity with the relevant requirements, shall h***e the right to refuse to accept the test report to redo the test.
一、售前服务承诺
1,提供***建议。在2小时内回复你的***和技术问题。
2,提供详细的信息。在4小时内将你需要寄出的技术数据,并尝试在两天内你可以收到。
3,提供合理的报价。在2小时内为您提供合理的价格。
4,提供接待。随时收到你的访问,并试图提供各种便利条件为你工作。
第二,销售服务承诺
1,采用***统一工业产品销售合同和你签订合同和技术协议。
2、自觉遵守合同法的规定,确保顺利合同和技术协议的性能。
3,成交量为您提供优质的产品,并采用***优运输方式,以确保您收到货物完好无损。
4、积极与使用交流,尊重用户,为用户提供周到的技术支持。
5,accordi
