企业资质

银杉电源设备(北京)有限公司

普通会员7
|
企业等级:普通会员
经营模式:
所在地区:北京 北京
联系卖家:
手机号码:
公司官网:
企业地址:
企业概况

银杉电源设备(北京)有限公司成立于2018年是一家主要经营蓄电池、ups不间断应急电源的经营机构。现注册资本为人民币2000万元,主要经营1:德国阳光蓄电池2:大力神蓄电池3:圣阳蓄电池4:山特蓄电池5:BB蓄电池6:冠军蓄电池7:汤浅蓄电池8:友联蓄电池9:松下蓄电池10:山特UPS电源11艾默生......

意大利BRAGA MORO蓄电池(中国)区域***

产品编号:713504725                    更新时间:2019-06-21
价格: ¥999.00

银杉电源设备(北京)有限公司

  • 主营业务:UPS电源、蓄电池、工业蓄电池、太阳能蓄电池、光伏蓄电池、胶...
  • 公司官网:
  • 公司地址:

联系人名片:

联系时务必告知是在"产品网"看到的

产品详情

意大利BRAGA MORO蓄电池(中国)区域***

A.电池容量转换曲线

b.5秒1分钟放电特性曲线

c.浮充压力和温度曲线

d.浮动电池寿命和温度曲线

e.1小时后电池放电脉冲放电电流曲线的不同比率

f.0.5小时后电池放电脉冲放电电流曲线的不同比率

g.电池容量和放电时间曲线

h.不同的电池放电率、电压和时间关系曲线

对于所有提供的工程,应在图纸和***终图纸上加盖专用章。

7.1基本要求

7.1.1在本部分为执行合同方对所供设备进行检验和性能试验的报价时,应确保所供设备的报价符合本技术规范书的要求。设备及其主要部件按***有关标准进行型式试验、出厂试验,各种试验按***有关标准和规定进行。每组进行全电池出厂试验,并提供完整的试验报告和出厂试验报告及试验验收标准。

7.1.2报价方应在合同生效后一个月内,就按检验提供的本合同设备、性能验收试验标准进行询价,并在试验报告中对一个月前的试验标准、计划和报告进行询价方检验。相关标准应符合技术规范的规定。

7.1.3报价将与机器的所有设备现场试验相匹配。

7.1.4查询认为某项测试条件、内容、程序、测量和记录不符合要求的,有权拒绝接受测试报告重新进行测试。

A.电池容量转换曲线

b.5秒1分钟放电特性曲线

c.浮充压力和温度曲线

d.浮动电池寿命和温度曲线

e.1小时后电池放电脉冲放电电流曲线的不同比率

f.0.5小时后电池放电脉冲放电电流曲线的不同比率

g.电池容量和放电时间曲线

h.不同的电池放电率、电压和时间关系曲线

对于所有提供的工程,应在图纸和***终图纸上加盖专用章。

7.1基本要求

7.1.1在本部分为执行合同方对所供设备进行检验和性能试验的报价时,应确保所供设备的报价符合本技术规范书的要求。设备及其主要部件按***有关标准进行型式试验、出厂试验,各种试验按***有关标准和规定进行。每组进行全电池出厂试验,并提供完整的试验报告和出厂试验报告及试验验收标准。

7.1.2报价方应在合同生效后一个月内,就按检验提供的本合同设备、性能验收试验标准进行询价,并在试验报告中对一个月前的试验标准、计划和报告进行询价方检验。相关标准应符合技术规范的规定。

7.1.3报价将与机器的所有设备现场试验相匹配。

7.1.4查询认为某项测试条件、内容、程序、测量和记录不符合要求的,有权拒绝接受测试报告重新进行测试。

A. battery capacity conversion curve
B. for 5 seconds and 1 minute discharge characteristic curve
C. Float charging pressure and temperature curve
D. Floating battery life and temperature curve
E. Different ratio for battery discharge impulse discharge current curve after 1 hour
F. Different ratio for battery discharge impulse discharge current curve after 0.5 hours
G. Battery capacity and discharge time curve
H. Different battery discharge rate, voltage and time relation curve
For all provide engineering special seal shall be affixed to the drawings, and for the final drawings.
7.1 the basic requirements
7.1.1 during this part for the implementation of the contract party to the quotation of the equipment supplied by inspection and performance test experiment was carried out, ensure the equipment to be provided by quotation in compliance with the requirements of the technical specification. Equipment and its main components are conducted in accordance with relevant state standard type test, factory test, all kinds of test are conducted according to relevant standa*** and regulati*** of the state. Each group, all battery factory experiment was carried out, and to provide a complete test report and factory test reports and test acceptance criteria.
7.1.2 offer party shall within one month after the contract comes into force, to make an inquiry in connection with this contract equipment to be supplied by inspection, performance acceptance test criteria, and in the test report will be a month ago test standa***, plans and reports to send inquiry party inspection. Relevant standa*** shall comply with the provisi*** of the technical specification.
7.1.3 offer will match all equipment field test of the machine.
7.1.4 inquiry think a test condition, content, procedure, measure and record any item is not in conformity with the relevant requirements, shall h***e the right to refuse to accept the test report to redo the test.

银杉电源设备(北京)有限公司电话:传真:联系人:

地址:主营产品:UPS电源、蓄电池、工业蓄电池、太阳能蓄电池、光伏蓄电池、胶...

Copyright © 2025 版权所有: 产品网店铺主体:银杉电源设备(北京)有限公司

免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。产品网对此不承担任何保证责任。