BRAGA MORO battery（中国）股份有限公司网站
A. battery capacity conversion curve
B. for 5 seconds and 1 minute discharge characteristic curve
C. Float charging pressure and temperature curve
D. Floating battery life and temperature curve
E. Different ratio for battery discharge impulse discharge current curve after 1 hour
F. Different ratio for battery discharge impulse discharge current curve after 0.5 hours
G. Battery capacity and discharge time curve
H. Different battery discharge rate, voltage and time relation curve
For all provide engineering special seal shall be affixed to the drawings, and for the final drawings.
7.1 the basic requirements
7.1.1 during this part for the implementation of the contract party to the quotation of the equipment supplied by inspection and performance test experiment was carried out, ensure the equipment to be provided by quotation in compliance with the requirements of the technical specification. Equipment and its main components are conducted in accordance with relevant state standard type test, factory test, all kinds of test are conducted according to relevant standa*** and regulati*** of the state. Each group, all battery factory experiment was carried out, and to provide a complete test report and factory test reports and test acceptance criteria.
7.1.2 offer party shall within one month after the contract comes into force, to make an inquiry in connection with this contract equipment to be supplied by inspection, performance acceptance test criteria, and in the test report will be a month ago test standa***, plans and reports to send inquiry party inspection. Relevant standa*** shall comply with the provisi*** of the technical specification.
7.1.3 offer will match all equipment field test of the machine.
7.1.4 inquiry think a test condition, content, procedure, measure and record any item is not in conformity with the relevant requirements, shall h***e the right to refuse to accept the test report to redo the test.
8.1.2 offer field service personnel should possess the following qualificati***
8.1.2.1 observe discipline, abide by the site's each rules and regulati***, abide by rules of electric power safety work;
8.1.2.2 has the strong sense of resp***ibility and the dedication to work, in place in time;
8.1.2.3 understand the contract equipment design, familiar with its structure, has the same or similar unit site c***truction work experience, correctly on-site guidance;
8.1.2.4 healthy body, to adapt to the work at the site conditi***. Offer must replace the unqualified field service personnel.
8.1.3 offer field service personnel duty
8.1.3.1 quoted the main task of field service personnel including equipment call, unpacking of the goods inspection, quality problems of processing, guiding installation and commissioning, to participate in the start-up and performance acceptance test.
8.1.3.2 before installation and commissioning, offer technical service personnel should be on inquiry technical clarificaiton, procedure and method of explanation and dem***tration are going to do. For important process (see table), to offer technical people to confirm and visa, c***truction of inquiry party won't be able to the next procedure. Confirmed by the quoted and visa process quoted as a result of technical service personnel guidance errors and problems, take full resp***ibility for the party.
