Stoody AP stainless steel wires are designed for welding in all positi*** with either 100% CO2 (X=1) or Argon / CO2 (X=4) gas mixtures. These wires exhibit a spraylike arc transfer, easy slag removal and can be welded over a wide range of oody 309L T-1 AP wires can be used to join AISI 309 steel. They will also join AISI 304 to carbon and low alloy steels. AWS Classification: A5.22 E309LT1-X
Typical Tensile Properties
| Elongation | Tensile Strength | Yield Strength | 保护气体 |
| 34 % | 88 ksi | 69 ksi | 75% Ar - 25% CO2 |
| 38 % | 86 ksi | 64 ksi | 100% CO2 |
焊缝金属分析
| Mn | ||||||
| Mn | Mo | C | Si | Ni | Cr | Fe |
| 1.32 % | - | - | - | - | - | - |
| Mo | ||||||
| Mn | Mo | C | Si | Ni | Cr | Fe |
| - | 0.1 % | - | - | - | - | - |
| C | ||||||
| Mn | Mo | C | Si | Ni | Cr | Fe |
| - | - | 0.032 % | - | - | - | - |
| Si | ||||||
| Mn | Mo | C | Si | Ni | Cr | Fe |
| - | - | - | 0.88 % | - | - | - |
| Ni | ||||||
| Mn | Mo | C | Si | Ni | Cr | Fe |
| - | - | - | - | 13.0 % | - | - |
| Cr | ||||||
| Mn | Mo | C | Si | Ni | Cr | Fe |
| - | - | - | - | - | 23.5 % | - |
| Fe | ||||||
| Mn | Mo | C | Si | Ni | Cr | Fe |
| - | - | - | - | - | - | BAL % |
熔敷数据
| Deposition Type | TTW距离 | TTW距离（导电嘴到母材距离） | 保护气体 | 安培 | 电压 V | 直径 | 送丝速度 |
| Full Range | 10-13 mm | 3/8-1/2 in. | 75% Ar - 25% CO2 | 130-220 A | 24-27 V | .045 in. | 227-565 in./min |
| Full Range | 10-13 mm | 3/8-1/2 in. | 75% Ar - 25% CO2 | 170-300 A | 25-28 V | 1.6 mm | 155-320 in./min |