Coreshield 11 is an all-position self-shielded flux cored welding wire meeting all requirements for the E71T-11 classification. Coreshield 11 is excellent for use on single or multiple pass lap, fillet and butt welds on mild steels in all welding positi***. Limitati*** do exist for multipass welds in excess of 1/2 in (12.7 mm). It produces ***ooth arc action, full slag coverage, easy slag removal, and low spatter. This product should find excellent acceptance in general purpose mild steel fabrication. In structural fabrication, the product can be used where no sei***ic requirements are present. Coreshield 11 is run DCEN.
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 22 % | 90 ksi | 63 ksi |
焊缝金属分析
| P | |||||
| P | Mn | C | S | Si | Al |
| 0.01 % | - | - | - | - | - |
| Mn | |||||
| P | Mn | C | S | Si | Al |
| - | 0.70 % | - | - | - | - |
| C | |||||
| P | Mn | C | S | Si | Al |
| - | - | 0.25 % | - | - | - |
| Si | |||||
| P | Mn | C | S | Si | Al |
| - | - | - | - | 0.40 % | - |
| Al | |||||
| P | Mn | C | S | Si | Al |
| - | - | - | - | - | 1.60 % |
熔敷数据
| TTW距离 | TTW距离（导电嘴到母材距离） | 安培 | 效率 (%) | 熔敷率 | 电压 V | 直径 | 送丝速度 |
| 9.5 mm | 3/8 in. | 120 A | 77 % | 0.8 kg/h | 17 V | .035 in. | 155 in./min |
| 9.5 mm | 3/8 in. | 200 A | 81 % | 2.0 kg/h | 17 V | .035 in. | 392 in./min |
| 9.5 mm | 3/8 in. | 80 A | 75 % | 0.4 kg/h | 15 V | .035 in. | 206 cm/min |
| 12.5 mm | 1/2 in. | 150 A | 79 % | 1.0 kg/h | 17 V | .045 in. | 118 in./min |
| 12.5 mm | 1/2 in. | 225 A | 82 % | 1.2 kg/h | 18 V | .045 in. | 140 in./min |
| 12.5 mm | 1/2 in. | 95 A | 74 % | 0.4 kg/h | 15 V | .045 in. | 137 cm/min |
| 16 mm | 5/8 in. | 160 A | 78 % | 1.0 kg/h | 17 V | 1.6 mm | 142 cm/min |
| 16 mm | 5/8 in. | 200 A | 80 % | 1.3 kg/h | 18 V | 1.6 mm | 193 cm/min |
| 16 mm | 5/8 in. | 275 A | 81 % | 2.4 kg/h | 19 V | 1.6 mm | 132 in./min |
| 25 mm | 1 in. | 185 A | 77 % | 1.1 kg/h | 19 V | 2.0 mm | 127 cm/min |
| 25 mm | 1 in. | 250 A | 79 % | 2.0 kg/h | 20 V | 2.0 mm | 231 cm/min |
| 25 mm | 1 in. | 300 A | 81 % | 3.0 kg/h | 21 V | 2.0 mm | 135 in./min |