MS621FE-FL11E为（锰 硅）锂可充电池，是日本SII精工公司产品。该电池在负极采用高容量硅氧化物，在正极采用了锂锰复合氧化物。是具有***的周期寿命和过放电特性的锂可充电池。
（1）该电池具有如下特点：
1、放电容量大：具有3.3V~2.0V的高工作电压的同时,可以得到大的放电容量。
２、充电周期寿命长:在3.3V~2.0V的充放电条件(放电深度100%)下,可以实现200回全以上的充放电。
３、***的过放电特性:过放电到0.0V为止后,也能表现出稳定的放电容量。
以下为MS621二次性电池参数：
（2）要运用该电池产品：
GPS，VDR，无绳电话，小灵通，寻呼机，memory-ca***，传真机，个人电脑，掌上电脑，摄像机，数码相机，调谐器，手持终端动力源小且细长的便携式设备。
（3）各项参数
公称电压 (V)： 3V
公称容量(mAh)：5.5mah
标准充放电电流(mA)：0.015
周期寿命(次)100%充放电：100次
周期寿命(次)20%充放电：1000次
直径(mm)：6.8
高度(mm)：2.1 。
重量(g)：0.23
深圳市新田电子有限公司 本公司主营电池，经销批发纽扣电池、充电电池，与多家品牌电池***合作畅销广大消费者市场，在消费者当中享有较高的地位，公司与***各地多家零售商贸易商和代理商建立了长期稳定的合作关系，产品齐全，价格合理。本公司实力雄厚，重***、守合同、保证产品质量，以多品种经营特色和薄利多销的原则，赢得了广大客户的信任与支持。
|
specificati***
|
| type |
nominal
voltage
(v) |
charge voltage
(standard charge voltage)*6 |
nominal
capacity
(mah)*1 |
internal
impedance
(ω)*2 |
standard
charge/
discharge
current
(ma) |
maximum
discharge/
current
(continuous)
(ma)*3 |
cycle life (times)*4 |
size(mm) |
weight
(g) |
100%
d.o.d
(depth of
discharge)*5 |
20%
d.o.d
(depth of
discharge)*5 |
diameters |
height |
| ms412f |
3 |
2.8v to 3.3v (3.1v) |
1.0 |
100 |
0.010 |
0.10 |
200 |
1000 |
4.8 |
1.2 |
0.07 |
| ms518s |
3 |
2.8v to 3.3v(3.1v) |
3.4 |
60 |
0.010 |
0.15 |
100 |
1000 |
5.8 |
1.8 |
0.13 |
| ms614 |
3 |
2.8v to 3.3v(3.3v) |
2.3 |
50 |
0.025 |
0.25 |
200 |
1000 |
6.8 |
1.4 |
0.17 |
| ms614s |
3 |
2.8v to 3.3v(3.1v) |
3.4 |
80 |
0.025 |
0.25 |
200 |
1000 |
6.8 |
1.4 |
0.17 |
| ms621f |
3 |
2.8v to 3.3v(3.1v) |
5.5 |
80 |
0.025 |
0.25 |
200 |
1000 |
6.8 |
2.1 |
0.23 |
| ms920s |
3 |
2.8v to3.3v(3.1v) |
11.0 |
35 |
0.050 |
0.80 |
100 |
1000 |
9.5 |
2.1 |
0.47 |
*1nominal capacity indicates typical value of capacity whose voltage range is 3.3v to 2.0v,/f type and .s type 3.1v to 2.0v.
*2internal impedance is measured using ac(alternating current) method at the fully charged state.
*3maximum discharge current indicates the value of current for approximately 50% of nominal capacity.
*4cycle life times indicates the times of charge-discharge repeating for approximately 50% of the capacity value in the spec sheet.
*5100% and 20% are based on nominal capacity.
*6a c***tant voltage charge is recommended. but due to a limit in charging current,it is necessary to insert a resister to regulate charging current. please contact us for further details.
if a c***tant current charge is required, please contact us for more information.
|
| hb lithium rechargeable battery |
|
general description
|
for protecting the global environment, we developed lithium rechargeable battery which allows pb-free reflow soldering (automatic mounting by pb-free solder)
hb414 is the pb-free reflowable lithium rechargeable battery, by adopting highly heat resistant material and precise sealing technology. |
|
hb series features high capacity and long cycle life with possible charging voltage range, which is most suitable for backup use of real time clock and sram etc.
|
|
features
|
- pb-free reflowable
superior heat resistance (260oc peak) allows reflow soldering by pb-free solder.
- wide range of charging voltage :
wide range voltage allows to be used for various applicati***
- high capacity :
ten times higher than capacitor in 0.3mah typ.(charge:3v cut off 1.2v)
- long cycle life :
more than 1,000 times charge/discharge cycle(10% d.o.d)
- excellent over discharge characteristics
- wide range of operating temperature
from -20oc to 60oc
if you would like to use beyond the temperature range, please c***ult with us.
- approved product by ul(underwriters laboratories inc.)
ul file mh 15628
|
|
applicati***
|
| power supply back up use for cellular phone, wireless phone, phs, digital still camera, pda, md player.
|
|
specificati***
|
| type |
nominal
voltage
(v) |
charge voltage*4 |
nominal capacity
(voltage range)
(mah) |
internal
impedance
(ω)*2 |
standard charge
discharge current
(ma) |
cycle life
(time)*1,*3 |
diameter
(mm) |
height
(mm) |
weight
(g) |
| hb414 |
3.0 |
2.5v to 3.5v |
0.3(3.0-1.2)
0.2(2.5-1.2)
0.14(3.0-2.0) |
280 |
0.005 |
1000
(10% d.o.d)
100
(100% d.o.d) |
4.8 |
1.4 |
0.07 |
*1d.o.d.:depth of discharge
*2internal impedance is measured using ac (altering current)method at the fully charged state.
*3cycle life times indicates the times of charge-discharge repeating for approximately 50% of the capacity value in the spec sheet.
*4a c***tant voltage charge is recommended.but due to a limit in charging current,it is necessary to insert a resister to regulate charging ease contact us for further details.
if a c***tant current charge is required, please contact us for more information.
|
