|
输入电源 |
· Furnace input AC 208-240V ，50/60 Hz 输入电压 110V/220V 50/60 HZ |
|
Power 功率 |
6KW |
|
Working Temperature 工作温度 |
· Max. Temperature: 1200 °C (< 1 hr) ***高温度：1200℃(< 1 hr) · Continuous working temperature: 1100 °C 持续工作温度：1100℃ |
|
Heating Zone 加热区 |
· Heating Zone Length: 7.87" ( 200+200+200mm) 加热区长度：7.87”( 200+200+200mm) · C***tant Temperature Zone: 15.74 " (400mm. +/- 1ºC ) 恒温区长度：15.74 " (400mm. +/- 1ºC ) |
|
Heating Elements 加热元件 |
· Fe-Cr-Al Alloy doped by Mo 电阻丝（掺钼铁铬铝合金） |
|
Processing Tube 炉管 |
· High purity quartz tube: 100 mm OD x 1700 mm Length 石英管：100（外径）*1700（长）mm |
|
Copper foil width 铜箔基底宽度 |
≤80mm |
|
Copper foil running rate 铜箔前行速度 |
8cm/min---50cm/min 可调 Adjustable |
|
RF Signal frequency 射频信号频率 |
13.56MHz&plu***n;0.005%W |
|
Power output 功率输出范围 |
0-500W |
|
Vacuum Dgree 真空度 |
10-1Pa |
|
Dimensi*** 尺寸 |
280*60*130cm |
|
Warranty 质保 |
One year limited warranty with lifetime support (C***umable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.) 一年质保终身支持（消耗品如炉管，O型圈不在质保范围内） |
|
Application Note 应用 |
· Equipped with high precision mass flowmeter in the gas system,can control the gas flow 气路系统内部装有高精度质量流量计可准确的控制气体流量 · Gas can mix sufficient in required proportion in the static mixing chamber, 设静态混气室，有助于气体充分混合，按要求配比 · Can match R-T-R laminating & stripping equipment as below: 配套石墨烯卷对卷覆膜、剥离设备如下图
|
|
Details 细节图片 |
· Overall structure 整体结构
· District 分区
|
