|
爱多电子6*30mm高压***丝产品说明如下： 1.規格型***和安規認*** MODEL NUMBER AND SAFETY CERTIFICATION 1-1 品名規格：系列***+***定***流+***定***壓+認***符*** Model Number: Part Number+Rated Current+Rated Voltage+Approvals. 例子[example]: 6CFUP 10A 500V 1)系列*** Part Number 2)***定***流 Rated Current 1） 2） 3） 3)***定***壓 Rated Voltage 1-2 ***定***流和***定***壓 Rated Current And Voltage ***定***流： 63mA~30A Rated Current: 63mA~30A ***定***壓: 500V/600V AC/DC Rated Voltage: 500V/600V AC/DC 1-3標示Marking 保險絲上需有下列標示 The fuse shall h***e the following marking: 規格：特性符***+***定***流+***定***壓 Specification:Characteristic Symbol+Rated Voltage 63mA~800mA : _mA250V/500V 1A~30A:_A250V/500V Trade mark:The Manufacture’s Logo+Part Number+Approvals 63mA~30A:
注意：對標示字樣大小沒有規定 Note:Size of the markings h***e not be specified. 2.適用範圍 SCOPE 適用於一般***子設備。Used in electronic equipment. 3.工程圖和結構 OUTLINE DRAWING AND STRUCTURE 3-1 工程圖（***位：mm） Outline Drawing and Dimensi***(Unit:mm）
3-2結構 Structure
4.外觀及形狀 APPEARANCES AND CONFIGURATION 4-1外觀：不應有破碎、明顯的汙斑 Appearances:There shall no fragmentation and of remarkable blotch. 4-2形狀：帶腳的保險絲 Configuration:Axial Leaded Fuse.
5.物理特性 PHYSICAL CHARACTERISTIC 5-1 拉力測試 Tensile test 沿端子的軸向施加10N的拉力，持續1分鐘。 Keep pulling the cap of the fuse with 10N at axial direction for 1 min.
6.******特性 ELECTRICAL CHARACTERISTICS 熔斷/***流特性： Pre-Arcing Time/Current Characteristic
a、Breaking capacity（分断能力）(Time Lag and Fast Acting)
b、Electrical characteristics Fast Acting(参照美标)
c、Temperature character When 100% of rating the temperature rise doesn’t exceed 75℃. d、Approvals
7.環境特性 ENVIRONMENTAL SPECIFICATION 7-1 操作溫度範圍：-5℃~60℃ Operating Temperature: -5℃~60℃ 7-2 保存條件 Storage Conditi*** 溫度：+10℃~60℃ Temperature: +10℃~60℃ 在相對濕度≤75%下平均可存放3年 On ***erage, It can be stored below the relative humidity or 75% for 3 years. 在非露天下，相對濕度為95%下***多可存放30天。 Without dew, It can be kept under humidity of 95% for 30 days.
8.焊接條件 SOLDERING PAAMETERS 8-1波峰焊 W***e Solder 焊接溫度：260&plu***n;5℃ Soldering Temperature:260&plu***n;5℃ 焊接時間：4 Sec. Max. Soldering Time:4 Sec.Max. 8-2手工焊錫 Manual Solder 焊接溫度：350&plu***n;5℃ Soldering Temperature: 350&plu***n;5℃ 焊接時間：3 Sec. Max. Soldering Time: 3 Sec. Max.
9.其他使用注意事項 OTHER NOTICE IN USING 如果需在保險絲上加***縮套管，烘烤溫度與時間需參照以下規定 If heat shrink tubing was needed,the roast temperature and time should be refer to the following. 設定烘烤溫度：不大於150℃ 烘烤時間：50s Max. The temperature should be sel under 150℃,roast time:50s Max. |
